- Pro Digital Auto Slave Flash with Bracket Set for All Digital Cameras
- Auto Pre-flash Sensor for red eye; Flash Ready Light indicator
- Dramatically improves telephoto zoom flash pictures; Enables use of smaller apertures for increased depth of field
- Use off camera as a remote slave, place & aim it anywhere extra light is needed
- Brand New & Sealed! bracket includes hot shoe for easy flash removal
- Improves color, depth and evenness of lighting up to 34 feet or more
Q&A:
My digital camera has a built-in flash. Why do I need another?
br>Built-in flashes are only effective to 8-10ft or less. This high power flash greatly extends the range!
The built in flash units of digital cameras are on average effective to only about 8-10 feet, and that's when your lens is at its widest-angle setting . When you want to zoom in on the action (towards the telephoto end of your zoom range) you'll find that your built in flash does exactly opposite of what you want, and its range is reduced! So, when you want to use your camera's telephoto capability that you paid for, but also require the built in flash, your pictures come out dark or, even worse!
The advanced slave circuitry of the Pro Digital Auto Slave Flash with Bracket Set is not fooled by the "pre-flash" and eliminates the need for an electrical connection to your camera.
Can I use with a telephoto or wide-angle conversion lens? YES!
Unlike your camera's built in flash; the flash is mounted to the sid
Price: $ 8.83
- Attaches in Seconds
- Creates a perfect distribution of the light
- Aids in softening shadows and "red eye" effect
- Produces superior quality results
The Opteka flash diffuser creates a diffused bare bulb effect, giving even coverage across the entire frame, with lenses from 15mm to 200mm in the 35mm format (and equal in other formats as well). The Clearmax diffuser is easy to use and goes onto and off the flash in seconds with custom fitting and no touch fastener.
Designed for years of service without the bulk of some other diffusers, it is small enough to fit easily into a gadget bag or pocket.
List Price: $ 19.00
Price: $ 2.90
- Compatible with Canon Digital EOS and Nikon DSLR cameras
- Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim).
- For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
- Red charging indicator lamp flickers in every 1s; it indicates low battery.
- The flash unit has 8 steps of power output control which indicated by 8 pieces of LED.
1. M Mode
Press the MODE key to M Mode. In this mode, you can set TT560 On to your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal. ?
2. S1 Mode
(1) Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. ?
(2) When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger. ?
3. S2 Mode
Press the MODE key to S2 Mode. The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash. ?
4. Power-saving Function
(1) To save battery power, the flash will enter stand-b
Price:
- Single Color Wheel Light, Easy to set
- More energy-efficient,with light & motion sensors
- Durable, High Impact, Rust Resistant
- Auto shining No switch, 100% waterproof
- include:1*LED Flash light
If you want to add that personal touch to your car, bike - lighting is one of the best ways
Single Color Wheel Light, Easy to set
More energy-efficient,with light & motion sensors
Durable, High Impact, Rust Resistant
Auto shining No switch, 100% waterproof
include:1*LED Flash light
Price: $ 1.49
- Smallest digital flash-meter for reflective and incident light readings in ambient or electronic flash lighting conditions
- Exposures accurate down to a tenth-of-a-stop for both ambient and electronic flash light readings in full-stop mode.
- At ISO 100, the ambient EV range is 0 to 19.9, flash f/stops range from f/1.4 to f/90.9
- Pocket-sized, and easy to stow away. The L-308S measures 2.5"W x 4.3"H x 0.9"D (63mmW x 110mmH x 22mmD)
- Includes Lumidisc with pouch, soft case, strap, synchro terminal cap, AA battery.
The pocket-sized Sekonic L-308S FLASHMATE is the smallest and lightest digital light meter in the Sekonic line-up. Designed to read ambient or flash exposures in either reflected or incident modes, the L-308S delivers accurate exposure readings in full, half, or third-stop increments to mirror the exposure displays of most popular cameras. When set to full-stop mode, exposures are displayed in tenth-stop increments with a repeat accuracy of +/- 0.1 EV. Reflected readings capture at a light receiving angle of about 40-degrees, or slightly wider than the viewing field of a normal lens. For incident readings, a small, built-in Lumisphere slides over the silicon diode sensor. For flat-field incident readings, a Lumidisc (included) snaps over the sensor for metering flat artwork or measuring contrast and/or exposure ratios within a scene. Electronic flash exposures can be taken with or without a PC cord.
List Price: $ 416.00
Price: $ 218.00
LED REAR BICYCLE BIKE BLINKY FLASH/STEADY LIGHT 0.5 WATTS SUPER BRIGHT RED NEW
NEW LED Light UP Shoelaces Disco Flash Glow Stick fun
